> For the complete documentation index, see [llms.txt](https://docs.hackerfab.org/home/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.hackerfab.org/home/individual-fab-information/university-of-waterloo.md). # University of Waterloo The [Waterloo HackerFab](https://www.waterloofab.com/) operates as an officially recognised student design team in the University of Waterloo's Sedra Student Design Centre. The team aims to build low-cost, accessible semiconductor fabrication tools. Contact(s): * Skye Koh * Eric Jessee * Marcus Reuss * Emily Di Lauro Current Fab Capabilities: * Photolithography (with litho stage) * Spin-coater * DC Sputtering (Working on improving film quality, slightly conductive copper films as of March) * V1 Tube furnace * C-V Characterisation Setup Ongoing Projects: * DIY gas flow controller * V2 Tube furnace * Probe station * Thermal deposition * SiO2 Etching --- # Agent Instructions This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com. ## Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.hackerfab.org/home/individual-fab-information/university-of-waterloo.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.